FAPO PS069210 Dodge Challenger 2WD 2008-2011 High Performance Adjustable Car Acc
Upgrade the suspension performance and stance of your Dodge Challenger 2WD (2008–2011) with the FAPO PS069210 mono-tube height-adjustable coilover kit. The system is designed for suspension retrofit and performance upgrades, allowing you to lower the vehicle while improving handling and reducing body roll.
Key Features
Vehicle-Specific Fitment: Designed for Dodge Challenger 2WD models from 2008–2011.
Adjustable Ride Height: Allows approximately 1–2.5 inches of lowering from factory ride height.
Mono-Tube Construction: Provides greater oil and gas capacity for consistent suspension performance.
Front & Rear Kit: Complete suspension kit covering all four corners.
Performance-Oriented Springs: High-tensile springs designed for repeated stress.
Improved Handling: Helps reduce body roll and improve acceleration and braking response.
Non-Adjustable Damping: Height is adjustable, while damping remains fixed.
Durable Construction: Manufactured from steel, aluminum and rubber components.
Tested Quality: Manufacturer states the product is 100% tested.
1-Year Warranty: Covered by a manufacturer's limited one-year warranty.
Specifications
| Specification | Details |
|---|---|
| Brand | FAPO |
| Series | PS Series |
| Model | PS069210 |
| Product Type | Mono-Tube Height-Adjustable Coilover |
| Vehicle | Dodge Challenger 2WD |
| Model Years | 2008–2011 |
| Position | Front + Rear |
| Height Adjustable | Yes |
| Damping Adjustable | No |
| Approx. Lowering | 1–2.5 inches |
| Material | Steel + Aluminum + Rubber |
| Front Spring Rate | 12 kg/mm (672 lbs/in) |
| Rear Spring Rate | 14 kg/mm (168 lbs/in) |
| Front Spring Length | 220 mm |
| Rear Spring Length | 240 mm |
| OE Number | PS069210 |
| Warranty | 1 Year |
| Origin | Zhejiang, China |
Package Includes
2 × Front Coilovers
2 × Rear Coilovers
2 × Adjustment Wrenches
Installation & Setup
The coilover system is designed to be installed using the appropriate suspension tools. Before installation, verify all components and hardware.
The manufacturer recommends setting the spring preload to approximately 5–10 mm (1/4–3/8 inch) and ensuring all hardware is properly tightened.
After installation:
Set the desired ride height evenly.
Check suspension clearances.
Perform a professional wheel alignment.
Recheck mounting hardware after initial driving.
Fine-tune the setup as required for the desired ride quality.
Important Fitment & Safety Notice
This coilover kit is designed to lower the vehicle and modify its suspension characteristics. It is intended as a retrofit/performance upgrade rather than a guaranteed direct replacement for every factory suspension configuration.
Please confirm your Dodge Challenger model, drivetrain and suspension configuration before ordering. Professional installation is strongly recommended because incorrect suspension installation or adjustment can affect vehicle handling and safety.
